evian (re) new, Руководство пользователя

Страница: 37 / 61

73 72
EN
• Check that there is still water in your bubble.
• Check that the evian
®
(re)new base is on a flat surface.
• The connector and the lever may be misaligned.
Remove the bubble carefully above a suitable surface
(away from electrical sockets, hot surfaces, etc.) and re-install it following
the instructions on p.65.
TROUBLESHOOTING
Experiencing other issues?
If you have any questions, contact us directly by telephone on:
UK: 0 800 4580366 – Free Call & Service.
ROI:1800 949993 – Free Call & Service.
TROUBLESHOOTING
THE (RE)NEW BASE
HAS STOPPED DISPENSING WATER
If that doesn’t work, check that the connector is properly in place
(see instructions on p.65).
Check that the lever and spout assembly is correctly inserted in the base by raising it
and pushing gently on it.
You may need to manually raise the lever into its initial position to stop the flow of water.
If you don’t manage to dispense any water, this means that the bubble is not correctly
positioned; try to pivot it again or remove it from the holder and then insert it in the base
once again.