Evi FA-03EVI, Руководство пользователя

Страница: 10 / 18

3
-
4 The space of installation and maintenance
Please leave enough maintenance space as the below
before the installation.
Figure 3
.
1
Figture 3
.
4
>30cm
>200cm
>30cm >60cm
Air outlet
Air inlet
Air inlet
Maintenance
space
>30cm
Air inlet
>60cm
>60cm
Figture3
.
2
>200cm
Air outlet
>50cm >300cm >300cm >30cm
Figture3
.
3
Back to back mounting Face to face mounting
Same direction mounting
>30cm
>200cm
>30cm
Air outlet
Air inlet
Air inlet
>60cm >60cm
Side by side mounting
6
3.Installation
Maintenance
space
Install the anti
-
vibration pads
and fix them with expansion screws
Air inlet Air outlet Air outlet Air inlet Air inlet
2 3
5.User instruction
Energy
-
saving mode
When you choose the “energy-saving mode”, the unit can adjust the
water inlet temperature intelligently according to the ambient
temperature, and make the unit work in the most energy saving way.
There are two energy saving options for the energy-saving mode:
1. Curve heating:
Adjust the water temperature intelligently according to the formula:
T
S
=(A-18)*(18-T
W
)/18+18+B
T
S
A=40, B=0 A=30, B=0 A=30, B=10
10
40
T
S
: Water inlet temperature
T
W
: Ambient temperature
A: Slope setting value of a curve, range of adjustment: 24~50, default: 30
B: Translational setting of a curve, range of adjustment: 0~30, default: 10
2. Timer heating:
According to the user's daily habits, the water temperature can be
adjusted flexibly according to four timing periods, so as to achieve the
most comprehensive use of energy saving:
Clock in the “timing1- timing2” time period, set the water inlet
temperature automatically change to “Set in period 1”;
Refer table 5.2, set the relevant parameters as follows:
Clock in the “timing2- timing3” time period, set the water inlet
temperature automatically change to “Set in period 2”;
Clock in the “timing3- timing4” time period, set the water inlet
temperature automatically change to “Set in period 3”;
Clock in the “timing4- timing1” time period, set the water inlet
temperature automatically change to “Set in period 4”;