FAQ
Question:
Will the UV Plus+ attached monitor render full 3D hardware rendered
graphics when in Mirror or Extended Modes?
Answer:
Yes, full 3D hardware rendered graphics can be displayed while in Mirror or
Extended Modes, however running in such a confi guration is limited as the applica-
tion in use may become slower or not as responsive.
Question:
Discoloration and constant fl ickering occurs through the UV Plus+
attached monitor.
Answer:
Check that your monitor’s cable is properly attached and check for loose or
faulty cables. If the problem continues, please contact EVGA Support at (888)-880-
EVGA(3842)
Question:
Why do I experience lag and delay when playing a 3D hardware acceler-
ated game in either Mirrored or Extended mode?
Answer:
USB 2.0 is limited to a 480Mbps transfer speed and because of this limita-
tion only so much data can pass through at one time. This causes a delay that can
both be seen and felt when playing a game when using the UV Plus+ device.
Question:
How many monitors are supported when using UV Plus+?
Answer:
The maximum amount of monitors supported is 6. Note that due to current
driver limitations, only a maximum of 4 monitors can be used with an NVIDIA
®
based
graphics card.
Question:
How can I stay updated with the latest UV Plus+ software releases?
Answer:
The UV Plus+ software that installs on to your computer has a built in Auto
Update feature which will automatically check for any updates and then prompt you
accordingly. You can right click the UV Plus+ icon in the Windows System Tray and
select Updates to either confi gure how your computer updates or to manually check
for an update.
Question:
How do I uninstall UV Plus+ software?
Answer:
In Vista click Start Control Panel Uninstall a program Select EVGA UV
Plus+ and select Uninstall.
In XP or 2000 click Start Settings Control Panel Add or Remove
Programs Select EVGA UV Plus+ and select Uninstall.
Question:
Why does my UV Plus+ attached monitor not display anything when my
computer is booting up or in a DOS based environment?
Answer:
UV Plus+ will only activate in a Windows based environment. Signal will
be passed to your UV Plus+ attached monitor when the UV Plus+ software has fully
loaded as part of the Windows startup process.
