EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 31
Chapter 4
4-0 DRIVER
INSTALLATION
After your computer’s Operating System is installed, you will need to install
drivers for your motherboard in order to gain full operation. Insert the Driver
Installation CD into your computer’s CD or DVD ROM drive and allow the
autorun function to bring up the installation menu.
If the autorun function is disabled on your computer, simply navigate to the CD
or DVD ROM drive that the Driver Installation CD is located in and double-click
the autorun.exe file.
From Driver installation menu choose from driver
options that will allow you to
install the following drivers:
•
NVIDIA Chipset Drivers
•
Marvell Ethernet Drivers
•
ALC850 AC97’ Codec Audio Drivers
After your computer finishes this installation, it will need to reboot in order for
the new drivers to take effect.
NOTE:
If you are installing drivers under the XP x64 operating
system install the motherboard chipset drivers by exploring the
CD and navigating to the Drivers folder, NFORCE drivers for XP
64, and run the setup.exe.
NOTE
:
If you are installing drivers under the Windows XP x64
operating system, please be warned that the drivers have not yet
been certified by Microsoft. As a result, you will see repeated
warnings to this effect. Simply answer each in the affirmative to
allow driver installation to proceed. Windows certified drivers are
currently in development and will be released as a free download
from our website as soon as they have passed Microsoft
certification testing.