EVGA 130-SB-E675-KR, Руководство пользователя

Страница: 23 / 42

EVGA P67 FTW Motherboard
23
Connecting SATA Cables
The SATA II connector is used to connect the SATA II device to the
motherboard. These connectors support the thin SATA II cables for primary
storage devices. The current SATA II interface allows up to 300MB/s data
transfer rate.
There are six (6) internal SATA connectors on this motherboard. Connection
points SATA0 – SATA4 (Black in color), are controlled by the P67 Chipset and
operate at a speed up to 300MB/s.
There is also a pair of ESATA ports on the rear panel which is operated by the
Marvell 88SE6121 Chipset.
The onboard ports that are red in color are SATA III ports and operate from
the P67 chipset at a transfer rate up to 600MB/s
SATA 4 (bottom)
SATA 5 (top)
Connect the locking cable end to
the motherboard connector.
Connect the end without the lock
to the SATA device.
SATA 2 (bottom)
SATA 3 (top)
SATA 0 (bottom)
SATA 1 (top)
GND
RX-
RX+
GND
TX-
TX+
GND