EVGA 122-M2-NF59-AX, Руководство пользователя

Страница: 31 / 67

EVGA Corporation 2900 Saturn St. Suite B, Brea, CA 92821
Phone: 888 / 881-EVGA - 714 / 528-4500 - Fax: 714 / 528-4501
Page 30
•“None” means no HDD is installed or set.
•“Auto” means the system can auto-detect the hard disk when booting up
•“Manual” mean the information can be entered manually. Note: “Access Mode”
must also be set to “CHS” to enable manual entry.
Cylinder Number of cylinders
Head Number
of heads
Precomp Write pre-compensation
Landing Zone
Landing zone
Sector Number of sectors
Award (Phoenix) BIOS can support 3 HDD modules: CHS, LBA, and Large or
Auto mode.
CHS
For HDD < 528 MB
LBA For HDD > 528 MB & supporting LBA (Logical Block Addressing)
Large For HDD > 528 MB but not supporting LBA
Auto Recommended mode
Floppy Drive A
This option allows you to select the kind of FDD to be installed, including
“None”.
Halt On
This category determines whether or not the computer will stop if an error is
detected during powering up.
All Errors Whenever the BIOS detects a nonfatal error, the system will stop and
you will be prompted.
No Errors The system boot will not stop for any errors that may be detected.
All, But Keyboard The system boot will not stop for a keyboard error; but it
will stop for all other errors.
All, But Diskette
The system boot will not stop for a diskette error; but it will
stop for all other errors.
All, But Disk/Key
The system boot will not stop for a keyboard or disk error,
but it will stop for all other errors.
Memory
This is a Display-Only category determined by POST (Power On Self Test) of
the BIOS.
Base Memory
The BIOS POST will determine the amount of base (or conventional) memory
installed in the system.
Extended Memory
The BIOS determines how much extended memory is present during the
POST.
Total Memory
Total memory of the system.