EVEXPERT EVELINE MAX II Скачать руководство пользователя страница 3

IMPORTANT SAFETY INSTRUCTIONS

This document contains important instructions and warnings that must be observed when
using the portable charger for electric vehicles from EV Expert s.r.o.

WARNING

Read this document before using the charger. Failure to follow the instructions or warnings described in this
document may result in fire, electric shock, serious injury, or death.

The portable charger contains an RCD-A-EV circuit breaker and therefore a residual current device is
not necessary.

The EVELINE MAX II portable charger is only designed for charging electric vehicles that support the IEC
62196-1 and IEC 61851-1 standard. Do not use it for other purposes or with other vehicles or objects.

The portable charger is only intended for vehicles that do not require ventilation during charging.

Before connecting the charger to the socket, make sure that the socket is rated for the required current
load and is not damaged.

Do not use the charger if it is defective, corroded, or otherwise damaged, or if the display indicates a
serious internal error.

Do not touch the end terminals with sharp metal objects such as wires, needles, or other tools.

Do not damage the charger with sharp objects or insert foreign objects into any part of the charger.

Keep the charger out of the reach of children or mentally incapable people.

When using and transporting the charger, handle it carefully to avoid damage. Do not subject it to
strong shocks, tension, twisting, tangling, or any other strain.

Protect the charger, and especially its terminals, from moisture and water. Do not use it in heavy rain or
snow.

Make sure that the charging cable does not obstruct the movement of pedestrians or other vehicles.

The charger must not be exposed to direct sunlight!

If a fault occurs, the user is not authorized to open, disassemble, repair or otherwise modify the device. If repair
is needed, contact your dealer or EV Expert s.r.o.

If you have any questions or recommendations, contact us at: [email protected]

EV Expert s.r.o.    |

[email protected]

| www.evexpert.eu

Page

3

Содержание EVELINE MAX II
















Отзывы: