3
2) Install
the
software
Insert the SD card and the software will automatically install
3) Connect to the car
1.
Place the bottom of the Nav-Cam 7000 into holder first, at a
slight forward angle.
2. While pushing down, move top of Nav-Cam 7000 until it
clips into place.
3.
Plug in car charger
NOTE:
When removing Nav-Cam 7000, remember to push down before angling
forward.
4) Resetting the Device
There are two ways to reset the device should there ever be a time
when it stops responding. The first method is to use the ‘soft reset’
button shown as 14 on the diagram. Pressing this button performs a
simple refresh of the RAM without losing the device settings.
The second method is to use the ‘Hard Reset’ switch shown as 15 on
the diagram.
This will reset the device to factory defaults and
should only be used if the soft reset has not fixed the problem.
