10
5.
Tighten Front Cross Plate mounting nuts:
a.
Adjust the front cross plate to be in the center of the
saddle brackets. (Value X)
b.
Slide the (4) cross plate bolts to the outside of the slots
in the cross plate.
c.
Tighten the cross plate nuts (B) to 120 in. lbs.
6.
Tighten Saddle mounting nuts.
a.
Tighten the saddle mounting nuts (A) to 80 in. lbs.
7.
Cam Lever Collars:
a.
Slide the cam lever collars (A) towards the inside of the cam.
b.
Leave a 1/8” gap between the collars and the saddle.
c.
Apply Loctite to the set screws on collars.
d.
Tighten the set screw on the collars.