Every Contr
ol S.r
.l. • FK 203T • Sheet 1/2
1
PREPARATIONS
1.1 How to install the instrument
Panel mounting, panel cut out 71 x 29 mm (2.79 x 1.14 in), with
click brackets (they are supplied by the builder) or screw brackets
(by request).
(1)
maximum depth with screw terminal blocks (by request)
(2)
maximum depth with extractable terminal blocks (standard model).
installation with click brackets (on the left-hand side, they are supplied by the builder)
smart guide
FK
203T
ON-OFF digital controller for ventilated re-
frigerating units
Version 1.02 of December the sixth, 2002
File fk203te_v1.02.pdf
PT
EVERY CONTROL S.r.l.
This Company belongs to
Via Mezzaterra 6, 32036 Sedico Belluno ITALY
Phone 0039-0437-852468 • Fax 0039-0437-83648
[email protected] • www.everycontrol.it
and screw brackets (on the right-hand side, by request); if you are using screw brackets,
you have to moderate the clamping torque, in order not to damage the box and screw
brackets.
1.2 Electrical connection
2
OPERATION
2.1 Preliminary information
During the normal operation the instrument shows the cabinet
temperature.
2.2 How to activate the defrost by hand
If you have to activate the defrost by hand:
• press
for 4 s
Unless the evaporator temperature is below the defrost end tem-
perature you have set with the parameter d2, the defrost will
not be activated.
3
WORKING SETPOINT
3.1 How to set the working setpoint
If you have to modify the working setpoint value:
• press
and
or
(3)
(3)
you can set the working setpoint between the limits you have set with the param-
eters r1 and r2.
ENGLISH
