Everwin PN65, Руководство по эксплуатации и обслуживанию

Страница: 6 / 12

6
SPECIFICATIONS
TOOL SPECIFICATIONS
MODEL PN65 PN70 PN80
HEIGHT 12.2" (311 mm) 12.5" (315 mm) 14.2" (362 mm)
WIDTH 5.0" (128 mm)
5.0" (128 mm) /
4.4” (112 mm) for PN70PAL
5.0" (128 mm) /
4.4” (112 mm) for PN80PAL
LENGTH 11.8" (300 mm) 12.0" (306 mm) 12.1" (307 mm)
WEIGHT
6.8 lbs. (3.1 kg) /
6.2 lbs. (2.8 kg) for PN65M
7.9 lbs. (3.6 kg) /
6.4 lbs. (2.9 kg) for
PN70PAL
8.7 lbs. (3.96 kg) /
7.2 lbs. (3.3 kg) for
PN80PAL
RECOMMENDED
OPERATING PRESSURE
70 to 120 psi (5 to 8 bar)
LOADING CAPACITY 225~300
225~300 /
2000~3000 for PN70PAL
225~300 /
2000~3000 for PN80PAL
AIR CONSUMPTION at
90 psi (6 bar) pressure
0.036 ft
3
(1.02 liter/cycle) 0.036 ft
3
(1.02 liter/cycle) 0.038 ft
3
(1.08 liter/cycle)
FASTENER SPECIFICATIONS
MODEL PN65 PN70 PN80
NAIL LENGTH
1-1/2" - 2-1/2"
(38 - 65 mm)
1-3/4" - 2-3/4"
(45 - 70 mm)
2" - 3-1/4"
(50 - 83 mm)
SHANK DIAMETER
.090" - .113" (2.3 – 2.9 mm) .092" - .113" (2.3 – 2.9 mm) .099" - .131" (2.5 - 3.3 mm)
HEAD DIAMETER
.224” - .283” (5.7 - 7.2 mm) .224” - .283” (5.7 - 7.2 mm) .224” - .283” (5.7 - 7.2 mm)
SHANK TYPE
Smooth, Ring, Screw
COLLATION
15
°
Wire
TOOL AIR FITTING
This tool uses a 1/4”-18 N.P.T. male plug. The inside diameter should be .280” (7 mm) or larger. The fitting must be
capable of discharging tool air pressure when disconnected from the air supply. (3/8” N.P.T male plug for
PN70PAL &
PN80PAL )
OPERATING PRESSURE
70 TO 120 psi (5 to 8 kg/cm
2
). Select the operating pressure within this range for best fastener performance.
DO NOT EXCEED THIS RECOMMENDED OPERATING PRESSURE.
TECHNICAL DATA
AIR CONSUMPTION
The tools require
PN65: 3.6 cfm (1.70 liter/second), PN70: 3.6 cfm (1.70 liter/second), PN80: 3.8 cfm (1.80 liter/second)
of free air to operate at the rate of 100 nails per minute, at 90 psi (6.0 kg/cm2). Take the actual rate at which the tool
will be run to determine the amount of air required. For instance, if your fastener usage averages 50 nails per minute,
you need 50% of the tool air consumption in running at 100 nails per minute.
NOISE
A-weighted single-event sound power level LWA, 1s:
PN65: 115.4 dBA, PN70: 115.7 dBA, PN80: 114.3 dBA
A-weighted single-event emission sound pressure level at work station LpA 1s,d:
PN65: 111.2 dBA, PN70: 112.4 dBA, PN80: 110.6 dBA
These values are determined and documented in accordance to EN12549.