5
All rights reserved Evervue. Information is subjected to change without prior notice.
PREPARATIONS
Using the Remote Control (Standard)
Batteries for the Remote Control (Standard)
Use the remote control by pointing it towards the remote sensor window of the set.
Objects between the remote control and sensor window may prevent proper operation.
Note: This illustration is for reference only. The remote sensor may be in
different locations on different models.
Cautions regarding use of remote control
Do not expose the remote control to shock. In addition, don not expose the remote
•
control to liquids, and do not place in an area with high humidity.
Do not install or place the remote control under direct sunlight. The heat may
•
cause deformation of the unit.
The remote control may not work properly if the remote sensor window of the main
•
unit is under direct sunlight or strong lighting. In such a case, change the angle
of the lighting or LCD TV set, or operate the remote control closer to the remote
sensor window.
If the remote control fails to operate the LCD TV functions, replace the batteries in the remote control.
1.Open the battery cover.
2. Insert two size-AAA batteries
Install two “AAA”
batteries matching
the +/- polarities
of the batter to the
+/- marks inside the
battery compartment.
3. Replace the battery cover.
Precaution on battery use
Improper use of batteries can result in a leakage of chemicals and/or explosion. Be sure to follow the instructions
below.
Place batteries with their terminals corresponding to the (+) and (-) indications.
•
Different types of batteries have different characteristics. Do not mix batteries of different types.
•
Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries and/or cause
•
old batteries to leak chemicals.
Remove batteries as soon as they are non-operable. Chemicals that leak from batteries can cause a rash. If
•
chemical leakage is found, wipe with a cloth.
The batteries supplied with the product may have a shorter life expectancy due to storage conditions.
•
If the remote control is not used for an extended period of time, remove the batteries from the remote control.
•
