7700 MultiFrame Manual
7707OO-2-OC Telecom and Datacom Optical Wavelength Converter
Revision
1.3
Page-1
1. OVERVIEW
The 7707OO-2-OC is a VistaLINK
®
enabled, optical to optical wavelength converter for telecom and
datacom signals. Reclocking and data rate indication is provided for supported rates from 125 Mb/s to
3.187 Gb/s, as per the table below:
Standard Data
Rate
Telecom
OC48/STM16 2.488
Gb/s
OC12/STM4 622
Mb/s
OC3/STM1 155
Mb/s
Gigabit Ethernet
1.25 Gb/s
Datacom
Fiber Channel
2.125 Gb/s
Fiber Channel
1.062 Gb/s
Fiber Channel
531 Mb/s
Fiber Channel
266 Mb/s
Fiber Channel
133 Mb/s
Fast Ethernet
125 Mb/s
XAUI 3.125
Gb/s
XAUI 3.187
Gb/s
ESCON 200
Mb/s
Monitoring and control of card status and parameters is provided locally at the card edge and remotely via
VistaLINK
®
. The 7707OO-2-OC accepts two fiber inputs and provides two optical outputs.
The 7707OO-2-OC is available in different versions to meet a variety of applications. All versions accept
1310 nm to 1610 nm optical input signals on multi-mode or single-mode fiber. They produce a 1310nm
optical output signal for interfacing with connected equipment. FP, CWDM and DWDM laser types are
available for interface with the fiber link connection (See specifications for complete information).
Features:
•
Reclocking and indication for OC-3/STM-1, OC-12/STM-4 and OC-48/STM-16 and a number of
other telecom and datacom rates (see specifications)
•
Non-reclocking mode for support of additional signal rates
•
Full-Duplex
•
Wide range optical input (1270nm - 1610nm)
•
1310nm, 1550nm, CWDM and DWDM wavelengths available for fiber link connection
•
DWDM wavelengths (ITU-T G.694.1 compliant) also available for fiber link connection
•
Comprehensive signal and card status monitoring via four digit card edge display or remotely
through SNMP and VistaLINK
®
capability
•
Detection and display of optical input power and data rate
•
Fully hot-swappable from front of frame
