background image

 

MViP User's Guide 

 

 

Revision 1.1

 

Page - 1 

1. 

OVERVIEW 

MViP  is  an  IP  based  Multi-Image  display  and  Monitoring  solution  targeted  at  applications  where  simple 
and  efficient  monitoring  of  audio  and  video  from  an  IP  transport  stream  is  required.  MViP  includes  the 
ability to monitor at the transport stream level using Evertz award wining TSM (transport stream analyzer 
technology). It also leverages industry leading AVM (audio / video monitoring) technology from the MVP™ 
to determine faults with the audio and video at the base band level.  
 
MViP  is  developed  to  be  used  as  a  tool  for  digital  headends,  IPTV  networks,  and  sites  using  IP  for 
distribution  with  a  requirement  to  monitor  and  display  audio  and  video  along  with  fault  information  and 
transport details on a simple to configure DVI based monitor. MViP supports all major video compression 
standards,  and  therefore  can  be  used  in  almost  any  application  where  video  and  audio  are  being 
transported  over  IP.  MViP  is  SNMP  enabled,  which  allows  VistaLINK

®

  Pro  to  configure  and  store  all 

monitoring values and alarms. 
 

Features

 

  Multi-Image display of multiple IP based video programs with associated audio level bars and UMDs 

  Supports IP based monitoring and display from up to 1Gbps Ethernet network 

  Supports both Unicast and Multicast network topologies 

  Supports all major video compression standards: MPEG 2, H.264 / MPEG 4 AVC, MPEG 4 Part 2, 

VC-1 

  Supports all major audio compression standards: MPEG1-L2, AC3, AAC 

  Video monitoring: loss, black, freeze and macro block detection 

  Audio monitoring: loss, audio over, audio under 

  Metadata monitoring (optional) CC monitoring 608/708 WST OP42/OP47, XDS, Active 

  Transport stream monitoring: TR101290 Level 1, level 2*, and partial level 3 

  Dual Head DVI output: two unique outputs over DVI resolution support up to 1920x1200 

  Simple on screen layout tools, including window creation and layout 

  Includes additional informative objects: analog clocks, digital clocks, bit rate monitors and more 

  SNMP enabled: complete integration with SNMP monitoring solutions like VistaLINK

®

 PRO 

 
 

 

 

Figure 1-1: MViP System 

 

Содержание MViP

Страница 1: ...transported over IP MViP is SNMP enabled which allows VistaLINK Pro to configure and store all monitoring values and alarms Features Multi Image display of multiple IP based video programs with associated audio level bars and UMDs Supports IP based monitoring and display from up to 1Gbps Ethernet network Supports both Unicast and Multicast network topologies Supports all major video compression st...

Страница 2: ...ViP 2RU frame from the shipping container Please note The unit is heavy therefore it is recommended that two people remove the unit from the container 2 Remove the side rails from the shipping container If the MViP is to be rack mounted the side rails must be securely fastened to the MViP before mounting the unit in a 19 equipment rack 3 Attach the side rails to the chassis Please refer to the doc...

Страница 3: ... Connect the Ethernet cables to the network ports on the back of the MViP Please note To avoid an IP conflict on the networks it is best to configure the network settings before physically connecting the cables into the network ports The upper network connection is used for management purposes SNMP etc The lower network connection is used for data Both ports should be connected to Ethernet network...

Страница 4: ...e by loosening the Pem screws on the left and right sides of the frame 10 The MViP will now turn on and will run through its opening sequence for approximately 1 minute 1 2 CONFIGURING THE MVIP SYSTEM AND NETWORK SETTINGS 1 The user must complete the hardware setup in section 1 1 before configuring the MViP network settings 2 Once the MViP has been powered on the user will see a mouse pointer in t...

Отзывы: