evertz hd9084 Скачать руководство пользователя | Manualshive

Страница: 89 / 126

background image

HD9084 HDTV Caption Encoder Manual

SERIAL CONTROL PROTOCOL

Page 4-15

If the parameter

k/d

is D, and the article is currently being output, it will not be removed until it has been

completely output.

Examples: ^A1<sp>Test<sp>T2<sp>5<sp>D<cr>

The article called ‘Test” will be placed at the end of the Text 2 output queue. The article
will be deleted after it is output 5 times.

^A1<sp>Test<sp>T2<sp>9999<sp>H<cr>

The article called ‘Test” will have its repeat count change to indefinite. It will not be
placed into any of the output queues.

4.4.3.

Delete Article

This command allows the user to remove an article from all output queues. If the article is currently
being output, it will not be removed until it has been completely output.

Command:

^A4<sp>name<sp>k/d<cr>

Default:

k/d

last keep/delete status specified for the article

The parameter

name

identifies the name of the article.

The parameter

k/d

indicates whether the article will be deleted from memory or not.

Examples: ^A4<sp>Test<sp>D<cr>

The article called ‘Test” will be removed from all output queues and deleted from
memory.

4.4.4.

Queue Articles

This command will delete the entire specified output queue and replace it with the articles named (if
any). The user enters the names of the articles separated by <cr> in the order that they are to appear in
the output queue. The encoder continues to add articles to the queue until it receives a ^C. The article
names may be edited by using the ^H (backspace) and ^X (delete line) characters before the <cr> is
input.

Command:

^A8<sp>tc<cr>

name<cr>name<cr>....name<cr>^C

Default:

none

The parameter

tc

identifies the text channel number of the output queue the articles will be placed into.

The parameter

name

identifies the name of each article to be placed in the queue. If no article names

are given, the specified article output queue is cleared and no articles will be output in that data stream.

Example:

^A8<sp>T1<cr>TEST<cr>TEST2^C

USO

RESTRITO

«
...
87
88
89
90
91
...
»

Содержание hd9084































































































































Отзывы:

Нет отзывов

Похожие инструкции для hd9084

Бренд: Patton electronics Страницы: 9

Бренд: NEC Страницы: 2

Бренд: NEC Страницы: 29

Бренд: NEC Страницы: 2

Бренд: Parker Страницы: 36

MaitreView 4KLite

Бренд: AVLink Страницы: 10

BLUESTREAM DA44AU

Бренд: Dante Страницы: 12

Бренд: StarTech.com Страницы: 24

Бренд: Beresford Страницы: 4

Auto-Link-SPE-G

Бренд: I-novative Страницы: 10

Бренд: Suaoki Страницы: 32

VARIOMAT 2 11MM

Бренд: Calpeda Страницы: 64

Бренд: M-Audio Страницы: 2

Бренд: M-system Страницы: 3

OPS500-501 Series

Бренд: AXIOMTEK Страницы: 54

Бренд: Avtech Страницы: 4

Бренд: RDZ Страницы: 60

AMX N2400 Series

Бренд: Harman Страницы: 80

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды