7882DM2-LB4-CA2-ASI Series
Satellite DVB-S/S2/S2X Demodulator
Revision 1.0
Page - 17
Figure
4-5 : WebEASY
®
- TS Path
4.2.1. ASI Configuration
If the sources to the demodulator are ASI streams over coaxial cable, it is assumed that a valid source
is connected to the ASI INPUT port on the rear plate of the unit.
ASI Direction:
This parameter sets the ASI port as input or output.
ASI Input Present:
This parameter displays the status for ASI presence.
To select
ASI 1
as a source to the demodulator, follow the steps below:
1. Navigate to the
ASI Configuration
section under the
TS Path
tab.
2. For ASI1, set
ASI Direction
to
Input
, and then click
Apply
.
3.
ASI Input Present
status should confirm a valid ASI source is present.
4. Select
ASI1
as
Main Source
under the
TS Input Mapping & Status
section of the
TS Path
tab.
