evertz 7814UDX-4K Series Скачать руководство пользователя

Страница: 53 / 64

7814UDX-4K Series

HD/3G/UHD Up/Down/Cross Converters

Revision 1.2

Page - 43

ANC Packet Pass Thru:

The

ANC Packet Pass Through

Enable is the main control for enabling passing

ANC data seen on the input of the 7814UDX-4K card. When enabled the specified ANC packet is
embedded on the output. When disabled no ANC packets will be passed through the 7814UDX-4K card.

ANC Packet DID:

This control will set the DID of the ANC packet to be passed through. The DID has a

valid range from 0x1 to 0xFF with a default value of 0x1.

ANC Packet SDID:

This control will set the SDID of the ANC packet to be passed through. The SDID has

a valid range from 0x1 to 0xFF with a default value of 0x1.

ANC Packet Location:

This control specifies whether the output ANC packet should be located in the

HANC or VANC region.

VANC

When set to VANC the incoming ANC packets will be inserted on the VANC
region of the output video.

HANC

When set to HANC the incoming ANC packets will be inserted on the HANC
region of the output video.

ANC Packet Field 1 Output Line:

This control will set the Field 1 output line of the ANC packet to be

passed through. The valid range for the ANC Packet Field 1 Output Line is from line 9 to line 41. The
default value is 10.

ANC Packet Field 2 Output Line:

This control will set the Field 2 output line of the ANC packet to be

passed through. The valid range for the ANC Packet Field 2 Output Line is from line 9 to line 41. The
default value is 10.

ANC Packet I to P Conversion Mode:

This control will determine the method of outputting the ANC

packets on an interlaced to progressive conversion.

Pass Through

When set to

Pass Through

the module will take ANC packet from field 1 and

insert onto frame 1 and data on field 2 will be inserted onto frame 2.

Duplicate Packet

When set to

Duplicate Packet,

the module will embed

data from field 1 on to

both frame one and two on the output.

ANC Packet P to I Conversion Mode:

This control will determines the method of outputting the ANC

packets on a progressive to interlaced conversion.



NOTE:

If the module is current processing the selected DID, SDID then the

Mapped ANC

Packet PassThru Status

will report

blocked

Содержание 7814UDX-4K Series

































































Результаты поиска

Содержание 7814UDX-4K Series

Отзывы:

Похожие инструкции для 7814UDX-4K Series

Бренды по названию

Популярные бренды

evertz 7814UDX-4K Series, Руководство пользователя

Результаты поиска

Содержание 7814UDX-4K Series

Отзывы:

Похожие инструкции для 7814UDX-4K Series

Бренды по названию

Популярные бренды