evertz 7800MDM-12G, Руководство пользователя

Страница: 17 / 24

7800MDM-12G
12G to/from Quad-Link 3G Bi-Directional Converter for UHD Signals
Revision 1.0
Page - 9
4. WEB INTERFACE
The 7800MDM-12G can be controlled using Web Interface. WebEasy operates using Ethernet and SNMP
control protocols. The 7800MDM-12G DOES NOT HAVE card edge controls. As a result, 7800FC
modules must be installed in all frames that house 7800MDM-12G modules, or the card must be
connected directly with an Ethernet cable.
For the sake of brevity, the following sections describe module controls in terms of the parameters found
within the Web Interface screens for the 7800MDM-12G. As additional features and options are released,
additional sections will be appended to this manual to show those control screens.
After the card has been installed
and configured with the required network addresses for the control port, it
can be completely configured using the web interface. For doing this, simply type the IP address of the
control port of the 7800MDM-12G module in the web browser.

Note: The computer must be on the same Subnet in order to have communication with
the module.
Figure 4-1: WebEASY
®
- Login Menu
Login and Password are “ customer ”.
There are four different menus on the web interface as shown in Figure 4-2.