evertz 7780ASIB2-DS3/E3 Скачать руководство пользователя страница 35

Страница: 35 / 36

7700 MultiFrame Manual

7780ASIB2-DS3/E3 2 Channel ASI + Ethernet DS3/E3 Transceiver

Revision

2.0

Page - 31

7.4.

ISTA

LINK

CONTROLLED PARAMETERS

The following parameters can be remotely controlled through the

Vista

LINK

interface.

Parameter Description

Change Passcode

Setup the Passcode used to access the Video Blocking features.

Clear Counters

Allows the user to clear all error counters and reset the timer.

Remote Reset

Allows the user to remotely reset the 7780ASIB2-DS3/E3 card module.

Ethernet Mode

Allows the user to set Manual or Auto Ethernet mode.

Reset Continuity
Error Count

Allows the user to reset Input and Output Continuity Error Counter to 0.

ASI Enable

Allows the user to enable or disable ASI Input and Output channels.

Max Input Bandwidth

Enables the user to set the Maximum Input Bandwidth (Mb/s).

ASI Output Mode

Allows to user to set ASI output to Continuous or Discontinuous mode.

Table 7-2: VistaLINK

Controlled Parameters

7.5.

ISTA

LINK

TRAPS

The following traps can be

Vista

LINK

enabled and monitored.

Trap Description

Input and Output ASI Loss

Triggers when there is a loss of a valid video signal on channels 1 and
2.

Input Bandwidth

Triggers when Input 1 and 2 bandwidth is exceeded.

Input and Output Continuity
Count Error

Triggers when Input or Output 1 and 2 detects Continuity Count Errors.

Signal Loss

Triggers when a link loss is detected.

ASI Performance Status

Triggers when ASI Performance errors are detected: Signal Loss, Out of
Frame, Alarm Indication, Remote Alarm Indication, DS3 Idle Signal, and
Severely Errored Frame.

Severe Errored Frame

Triggers when one or all of severe errored thresholds are crossed.

Errored Second

Triggers when Line, Path or Section errored second is present.

Ethernet Link

Triggers when Ethernet Link is lost.

Table 7-3: VistaLINK

Traps

Содержание 7780ASIB2-DS3/E3





































Результаты поиска

Содержание 7780ASIB2-DS3/E3

Отзывы:

Бренды по названию

Популярные бренды

evertz 7780ASIB2-DS3/E3, Руководство пользователя

Результаты поиска

Содержание 7780ASIB2-DS3/E3

Отзывы:

Бренды по названию

Популярные бренды