manualshive.com logo in svg

evertz 7710DCDA-HD, Руководство пользователя, Страница: 26 / 33

Поделиться
Скачать
evertz 7710DCDA-HD Скачать руководство пользователя страница 26

7700 MultiFrame Manual 
7710DCDA-HD Downconverter & Distribution Amplifier 

5.9. UTILITIES 

The 

Utilities

 menus are used to list the module firmware version, upgrade the firmware, and manage the 

user presets.  The chart below shows the items available in the 

Utilities

 menu.  Sections 5.9.1 to 5.9.4 give 

detailed information about each of the parameters.   
 

Recall Preset 

 

Used to recall the current module configuration from one of the user presets 
or to reset the module to its factory preset condition. 

Store Preset 

  Used to store the current module configuration to one of the user presets. 

Upgrade 

  Used to upgrade the firmware in the module. 

About… 

  Shows the firmware version of the module. 

 

5.9.1.  Recalling Configurations to the User Presets or the Factory Preset 

The 7710DCDA-HD  modules provide ten user preset areas to store the complete set of controls from the 
on screen menu. 
 

Utilities 

 

Recall preset 

 

Cancel 
Factory 
1 to 10 

 

 

 

This control is used to initiate a recall of the current card configuration from 
one of the user presets or from the factory preset. 
 
Use the toggle switch to select the preset you wish to recall.  After selecting 
the preset, you must press the pushbutton before the recall will take place.  
You can abort the operation by pressing the pushbutton when 

Cancel

 is 

displayed. 

 

"

 

The current state of the card will be forgotten if it has not been saved to a preset 
before a recall is performed. 

 

"

 

There will be a slight disturbance in the operation of the card and the on-screen 
display while the new preset is being recalled. 

 

5.9.2.  Saving Configurations to the User Presets 

The 7710DCDA-HD  modules provide ten user preset areas to store the complete set of controls from the 
on screen menu.  
 

Utilities 

 

Store Preset 

 

Cancel 
1 to 10 

 

 

 

This control is used to initiate a store of the current card configuration into 
one of the user presets 
 
Use the toggle switch to select the preset location where you want to store 
the module configuration.  After selecting the preset, you must press the 
pushbutton before the store will take place.  You can abort the operation by 
pressing the pushbutton when 

Cancel

 is displayed. 

 

7710DCDA-HD-22 

Revision 1.3

 

Содержание 7710DCDA-HD


































Отзывы:

Нет отзывов