evertz 7708VB-8-HSE, Руководство пользователя

Страница: 20 / 50

7708VB-8-HSE User Manual
8 SDI/ASI or 6 HD-SDI plus Ethernet Fiber Transceiver
Page - 10
Revision 0.1
4.1. STATUS INDICATOR LEDS
Two large LEDs at the front card-edge display the status of module as follows:
MODULE OK: This Green LED indicates good module health. It will be ON while there is no
laser, XFP, card-slot or power faults.
LOCAL FAULT
: This Red LED will illuminate when a fault condition is detected. Possible fault
conditions include laser, XFP, card-slot or power faults. Whether or not this
LOCAL FAULT indication is reported to the frame may be determined by the
FRAME STATUS jumper (see section 5.1).
Eight multi-coloured LEDs have selectable video status indications as follows:
4.1.1. Input Video Status
Select indication of input video status using the CTRL/LED/VIN menu selection (see section 4.2).
GREEN
Indicates the presence of a valid input to the corresponding channel.
YELLOW Indicates that an input to the corresponding channel is denied for one of several
possible reasons. The STAT/VIN menu item for the corresponding channel will
report a reason (see section 4.2).
RED
Indicates the detection of video CRC or EDH errors, or a DVB-ASI error.
OFF
Indicates a signal loss of signal condition.
4.1.2. Output Video Status
Select indication of output video status using the CTRL/LED/VOUT menu selection (see section 4.2).
GREEN
Indicates the presence of a valid output to the corresponding channel.
YELLOW Indicates that an output to the corresponding channel is denied for one of
several possible reasons. The STAT/VOUT menu item for the corresponding
channel will report a reason (see section 4.2).
OFF Indicates a signal loss of the signal condition.