Frame Manual
500DA2Q-3G 3G/HD/SD-SDI Dual Reclocking Distribution Amplifier
5.2. SELECTING
NON-RECLOCK MODE
Two jumpers, located near the front of the module, determine whether each half of the module will operate
as a reclocking amplifier for SMPTE 292M (1.5 Gb/s), SMPTE 259M (143 to 360 Mb/s), SMPTE 344M
(540 Mb/s) or DVB-ASI video signals or as a non-reclocking distribution amplifier with other data rates. J2
controls the bypass for reclocker 1 and J5 controls the bypass for reclocker 2.
BYPASS SELECT:
To operate the module in reclocking mode, install the jumper in the RECLOCK
position. The RATE jumper associated with the respective reclocker must be set to
match the signal being reclocked.
To operate the module in non-reclocking mode, install the jumper in the BYPASS
position.
Page - 8
Revision
2.0
