3505 Frame Manual
3505FR Series Fiber Optic SFP Frame
INSTALLATION
Revision 1.2
Page - 11
2.4.2. Assembly
Assembly or repair of the Evertz
®
SFP modules is done only at Evertz facility and performed only by
qualified Evertz technical personnel.
2.4.3. Labeling
Certification and Identification labels are combined into one label. As there is inadequate space on the
product to place the label, it is reproduced here in the manuals.
•
There is no date of manufacture on this label as it can be traced by bar code label placed on the
Evertz
®
SFP module.
•
The model number of the SFPs containing lasers is one of: 3405T13-2, 3405Txx/yy-2, 3405R-2,
3405R-2R, 3405OO13-DA4, and 3405OOxx-DA4.
where xx and yy = 27, 29, 31, 33, 35, 37, 43, 45, 47, 49, 51, 53, 55, 57, 59, 61
Figure 2-4: Reproduction of Laser Certification and Identification Label
2.4.4. Handling and Connecting Fibers
CAUTION: Never touch the end face of an optical fiber. Always keep dust
caps on optical fiber connectors when not connected and always
remember to properly clean the optical end face of a connector before
making a connection.
The transmission characteristics of the fiber are dependent on the shape of the optical core and
therefore care must be taken to prevent fiber damage due to heavy objects or abrupt fiber bending.
Evertz recommends that the user maintains a minimum bending radius of 5 cm to avoid fiber-bending
loss that will decrease the maximum attainable distance of the fiber cable. For further information about
care and handling of fiber optic cable see the Evertz website. (http://www.evertz.com/resources/)
