evertz 3067VIP10G Series, Руководство пользователя

Страница: 20 / 46

3067VIP10G Series User Manual
JPEG2000 Advanced Compact Multi-Image Display Processors
Page 12
Revision 0.1
4.5. ENCODER PID CONTROL
Figure 4-5: Encoder PID Control Tab
PMT PID: This parameter allows the user to select the PMT PID for the output stream. Range for this
value can be from 16 to 8190.
Video PID: This parameter allows the user to select the Video PID for the output stream. Range for this
value can be from 16 to 8190.
VANC PID: This parameter allows the user to set the PID for VANC data being sent on ENC J2K and
ENC 10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
PCR PID: This parameter allows the user to set the PID for PCR data being sent on ENC J2K and ENC
10bit 4:2:2 H264. Range for this value can be from 16 to 8190.
PID Configuration: This parameter sets the method to configure the PID. If it is pre-defined, then all
PID controls will be greyed out. The second method allows the user to manually configure them.
Audio PID Control Output: This parameter defines the Audio PID for audio 1 through 8, and can
range from 16 to 8190.