2430RX-J2K-IP
JPEG2000 to HDMI Converter User Manual
Revision 0.1
Page - 3
2.
GETTING STARTED
2.1.
FRONT & REAR PLATE DESCRIPTION
Figure 2-1: Front Plate
POWER
The 2430RX-J2K-IP comes with an auto-ranging DC voltage adapter that automatically
senses the input voltage. Power should be applied by connecting a 3-wire grounding type power
supply cord to the power entry module on the DC voltage adapter. The power cord should be minimum
18 AWG wire size; type SST marked VW-1, maximum 2.5m in length. The DC cable of the voltage
adapter should be connected to the DC power jack on the rear panel. A green LED located beside the
DIP switch connector will be illuminated when there is power applied to the 2430RX-J2K-IP.
SDI OUT:
BNC per IEC 60169-8 Amendment 2
2.1.1. Video Connection
Figure 2-2: Rear Plate
COM:
DVI, VGA and Component cable
Supported Resolution:
VESA: VGA, SVGA, XGA, WXGA, SXGA, SXGA+, UXGA,
WSXGA+, WUXGA, WQXGA (dual-link). CEA-861B: 480p, 576p,
720p, 1080i, 1080p
Color Resolution:
24 bits
CONTROL:
Standard CAT5 cable (not included)
AUDIO OUT:
1/8" Stereo (3.5mm) Male Mini to 2-RCA Male Audio Y-Cable (not
included)
HDMI OUT:
Standard HDMI Cable (not included)
Содержание 2430RX-J2K-IP Series
Страница 2: ...This page left intentionally blank ...
Страница 10: ...2430RX J2K IP JPEG2000 to HDMI Converter User Manual Page 2 Revision 0 1 Figure 1 1 Block Diagram ...
Страница 38: ...2430RX J2K IP JPEG2000 to HDMI Converter User Manual Page 30 Revision 0 1 6 8 NOTIFY Figure 6 9 Notify Tab 1 ...