2430DAC-HD HDTV Digital to Analog Converter Manual
2430DAC-HD - 4
Revision
1.2
3.6. ELECTRICAL
Voltage:
+
12VDC
Power:
6 Watts.
EMI/RFI:
Complies with FCC regulations for class A devices.
Complies with EU EMC directive.
3.7. PHYSICAL
Dimensions:
6“ L x 3.5” W x 1” H
(152mm L x 89mm W x 25mm H)
With Mounting Flanges:
6“ L x 4” W x 1” H
(152mm L x 114mm W x 25mm H)
Weight:
0.5 lbs. (0.28 Kg)
4. STATUS
LEDS
MODULE FAULT
This Red LED will be on when input video is lost or there is a fault in the module.
VIDEO PRESENT:
This Green LED will be On when there is a valid HDTV video signal present at the
module input.
POWER
This Green LED will be on when there is power applied to the unit. (Located beside
DC power connector)
5. USER
CONTROLS
The 2430DAC-HD is equipped with an 8 position DIP switch to allow the user to select various output
signals available. The On position is down, or closest to the printed circuit board. . Table 5-1 gives an
overview of the DIP switch functions.
DIP Switch Function
1
2
3
4
Video Output signal select
5
Aspect Ratio Marker enable
6 Not
used
7 Not
used
8 Not
used
Table 5-1: DIP Switch Functions