EVERSPRING VC705, Руководство пользователя

Страница: 3 / 9

5. Place the QR code at about 10cm in front of the camera lens.
6. If the QR code scan is successful, a musical tone will be heard. The camera
will then attempt to connect to the home network.
Note : If there is no musical tone after 30 seconds, try moving the
smartphone further away from the camera in gradual steps.
Method 2 : By WPS setup. This requires your home router to support WPS.
1. Power up the camera using the supplied power adaptor and wait for the
musical tone. This usually takes about 30 seconds.
2. Using a sharp pin, briefly press the reset button for 1 second and release.
3. Within one minute, press the WPS button on your home router.
4. When camera has established connection with the router, a musical tone will
be heard.
Binding with Homesys
1. Log into the Homesys account from a web browser.
2. Select
“System”, then “Add a device”.
3. Select
“Camera”.
4. Enter the Access Code on the label behind the camera and click
“Next step”
Access Code
label