1
SR804
Wireless Keyfob
Installation Instructions
General Introduction
The SR804 Wireless Keyfob is used to Arm, Partial Arm and Disarm the system.
The Keyfob also incorporates a Panic switch that will immediately initiate a Full
Alarm condition when the system is Armed or Disarmed. Its great compatibility with
our U-Net family security products makes it suitable for smart home cloud based
platforms such as Homesys
Product Overview
A LED indicator
B Arm
C Partial Arm
D Disarm
E Panic Switch
F Key Chain Ring
G Negative Polarity
H Positive Polarity
Binding with Homesys
1. Remove the battery cover behind the keyfob.
2. Prepare the CR2032 coin cell battery by removing any plastic wrapping on the
battery. Do not insert the batteries yet into the unit.
3. Log into the Homesys account from a web browser.
4. Select “System”, then “Add a New Device”.
5. Select “Keyfob”.
6. The following screen will appear. This means the gateway is entering
binding
mode.
