EverSewn Maker 200, Инструкция по эксплуатации

Страница: 30 / 52

23
Sewing on buttons
Stitch width dial Stitch length dial
Install the darning plate. (1)
Change presser foot to button sewing foot.
Position the work under the foot. Place the button in the desired
position, lower the foot. Set the pattern selector knob on zig zag
stitch " ". Adjust the stitch width to "3" - "5" according to the
distance between the two holes of the button. Turn the
handwheel to check that the needle goes cleanly into the left
and right holes of the button. Set the pattern selector knob on
straight stitch " ", and sew a few securing stitches. Set the
pattern selector knob on zig zag stitch " ", and slowly sew on
the button with about 10 stitches. Set the pattern selector knob
on straight stitch " ", and sew a few securing stitches. (2)
If a shank is required, place a darning needle on top of the
button and sew. (3) For buttons with 4 holes, sew through the
front two holes first (2), push work forward and then sew
through the back two holes as described. (3)
3 2
1