EVERSAFE V2 Backpack, Инструкция по эксплуатации

Страница: 9 / 16

Contents
x4
Base Attachment
2
3
4
5
2 Feed the base cable through the center hole
at the bottom of the backpack
3 Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4
Insert the screws into the holes located in
the base and twist to tighten
5 Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
1
2
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1
x1
x1
1
2
3
1
3
4
2
1 Eversafe Backpack
2 Zipper Cover Lock Cable
3
Zipper Cover TSA Combination Lock
1 Safedock Base
3 Safedock
4 Base Release Clip
2
20mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1 Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note
Contents
x4
Base Attachment
2
3
4
5
2
Feed the base cable through the center hole
at the bottom of the backpack
3 Place the 25mm thumbscrews through the
holes located in the bottom of the bag
4 Insert the screws into the holes located in
the base and twist to tighten
5 Attach the clip to the base release cable
When reattaching the base
feet follow steps 3 and 4
Note
Zipper Cover
For optimum security lock down the zipper cover
using the zipper cable and pad lock.
1
2
3
4
Pull the zipper cover over the zip inserting the
pillars into the eyelets
Insert the cable through all four pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way
Once the cable has come through all four pillars
lock the cover in place at the pillar containing two
holes with the four digit combination lock
x1
x1
x1
x1
x1
1
2
3
1
3
4
2
1 Eversafe Backpack
2 Zipper Cover Lock Cable
3 Zipper Cover TSA Combination Lock
1 Safedock Base
3 Safedock
4
Base Release Clip
2 20mm Thumbscrews
x1
Backpack
Base Unit (sold separately)
Remove Backpack Base Feet
1
Remove the base feet and 12mm
thumbscrews from the bottom
of the backpack
Retain feet and
thumbscrews for future use
Note
The zipper cable is located in the outside pocket
at the back of the backpack
Note Note
The zipper cable is located in the outside
pocket in the front of the backpack.
Insert the cable through all six pillars. Feed the
cable through the pillar with two holes last.
The wider cable swage will stop the cable from
coming through all the way.
2
3