©2007 Pentair Water Treatment
340016 AU07
VALVE
(SUPPLIED BY
INSTALLER)
FLANGE AND
GASKET
(SUPPLIED BY INSTALLER)
BYPASS HEADER ASSEMBLY
(MUST BE VERTICALLY
MOUNTED)
HOSE
CLAMPS
FLEXIBLE
TUBING
WATER METER
FEEDER
ASSEMBLY
VALVE
(SUPPLIED BY
INSTALLER)
BYPASS HEADER
AND VALVE
(SUPPLIED BY
INSTALLER)
DUAL FEED
VALVE
ASSEMBLY
ALLOW 13 INCHES MIN.
FROM TOP OF FEEDER
TO OVERHEAD FOR
REMOVAL OF CARTRIDGE
14-1/2" PLUS
THICKNESS
OF GASKET
23" MAX
18" MAX
LOW HIGH
EVERPURE
®
BROMINATOR
Model SSFm-50
Type II, Class 1
NICN-4610
Serial No.
Job No.
Plymouth Products
Sheboygan, Wisconisn 53081
SIZING AND ORDERING A
PROPORTIONING BROMINATOR
For each distiller / watermaker served, determine the capacity
in gallons per day. Using this figure, calculate the discharge in
gallons per minute. For example: 12,000 gpd /24, /60 = 8.3 gpm.
Choose a part number corresponding to these flow rates:
SSFM-50AC SERIES
BROMINATOR
FLOW RATE (gpm)
SSFM-50AC SERIES
BROMINATOR
PART NO.
REPLACES
PART NO.
0.7
169096
EV906410
0.8 – 1.2
169097
EV906411
1.3 – 1.4
169098
EV906412
1.5 – 1.8
169099
EV906413
1.9 – 3.0
169100
EV906414
3.1 – 4.0
169101
EV906415
4.1 – 8.3
169102
EV906416
NOTES
A potable water storage tank should be treated whenever it is
filled from a shore source, or whenever there is no measurable
bromine residual in the tank. A measurable bromine residual will
insure the water is safe to drink. See our recirculating brominator
data sheets for this application.
SPECIFICATIONS
Weight
SSFM-50AC: 35 lbs. (15.9 kg)
Dry Weight
SSFM-50AC: 30 lbs. (13.6 kg)
MOuNTING
System components should be vertically mounted on a
bulkhead or stanchion within reasonable proximity to each
other and the bypass header assembly. A minimum of 13
inches of overhead clearance is required above the feeder
assembly for easy removal of the disposable bromine
cartridge. For convenience, the instruction plate with
operating procedure should be bulkhead mounted adjacent
to the proportioning bromine feeder.
PLuMBING TERMINATIONS
The proportioning bromine feeder is flanged per MIL-F-20042,
3/4-inch for all SSFM-50AC series models. A three valve by-
pass loop should be plumbed into bypass the proportioning
bromine feeder during maintenance or bromine cartridge
change. This bypass loop can be provided by the installer.
Pentair Filtration, Inc.
502 Indiana Avenue - P.O. Box 1047
Sheboygan, Wisconsin 53082-1047
Phone 866.873.7506 Fax 888.203.7361
International Phone 920.457.9435 International Fax 920.457.2417
www.everpure.com
