Everpure KleenSteam CT, Каталог

Страница: 25 / 72

Customer Service Email: cseverpure
@
pentair.com
n
Technical Support Email: servicespecialist
@
pentair.com 23
STEAM TREATMENT FILTRATION SYSTEMS
System
Max Flow Rate
Steamer Equipment Size gpm lpm
Claris ™ XXL
1.0 3.8
Boilerless: Rapid Flash Systems 2KW-3KW
Boilerless: Proofers, Small Flash Steamers 4KW-10KW
Boilerless: Medium Flash Steam & Combi 11KW-24KW
Boilerless: Large Flash Steam & Combi 25KW-36KW
Boiler: Small Steamers <125,000 BTU
Boiler: Medium Steamers 125,000-200,000 BTU
Boiler: Large Steamers 200,000-300,000 BTU
Kleensteam
®
CT 1.7 6.3 Counter Top (light duty) Counter Top
Kleensteam II Single 2.5 9.5 Boiler-Based
18KW - 48KW (electric)
125,000 - 225,000 BTU (gas)
Kleensteam II Twin 5.0 19.0 High Flow and Combi Ovens 175,000 - 300,000 BTU (gas)
*For flash steamers, refer to pages 30-33 for reverse osmosis systems.
Should I use Kleensteam or Claris XXL?
These two systems are very different, but both provide
excellent scale prevention. The Kleensteam uses phosphate
blend that essentially lubricates the dissolved mineral,
preventing it from returning to solid form. The Claris on
the other hand uses ion exchange (“saltless” softening) to
remove carbonate hardness and lower alkalinity, preventing
the scale-forming process from occurring. Both are highly
effective on boiler based steam ovens, but the higher capacity
of the Kleensteam gives it an edge. The Claris XXL has an
edge on direct injection steamers where water is sprayed
onto a hot plate and converted into steam (as opposed to
being superheated inside a boiler chamber and released as
steam into the cooking cabinet). The Kleensteam is effective
up to 12 grains of hardness. Above 12 grains of hardness, the
Claris XXL or a reverse osmosis system is recommended.
Should you have questions about your water or what would
work best on your steam oven, consult your local Everpure
®
representative.
System sizing guidelines:
Our system sizing guidelines are approximations based on properly installed equipment, average usage at normal operating
flow rate and average water conditions. These guidelines are designed to give you approximately 6 months of use between filter
cartridge changes. Variations in equipment usage and/or incoming water conditions can produce different results.
System Part Number
Auto
Shut-Off
Mounting
Bracket Connection
Rated Capacity*
Pack
Size
Ship Wt.
List Price lb kg gallons litres
Claris Head EV4339-21 Yes Yes 3/8" BSP –– –– 1 1 0.5 $133.00
Claris Head EV4339-23 Yes Yes 3/8" QCF –– –– 1 1 0.5 133.00
Claris Head EV4339-25 Yes Yes 1/4" QCF –– –– 1 1 0.5 133.00
Claris Cartridge XXLarge EV4339-14 –– –– –– 2,180 8,252 1 15.2 6.9 548.00
Claris Test Kit EV4339-40 –– –– –– –– –– 1 0.25 0.1 45.00
Claris Hose 10CM, 3/8" x 1/2" EV4339-52 –– –– –– –– –– 1 0.7 0.3 45.00
Claris Flow Meter US EV4339-31 –– –– –– –– –– 1 0.5 0.2 252.00
Claris Flow Meter 700 LPM EV4339-32 –– –– –– –– –– 1 0.5 0.2 88.20
*Based on 10 grains of hardness and a bypass setting of 0.