Installing Monitor Brackets
7
Screws
F or G or H or I
Spacers are required
for recessed mounting
holes (J). Place spacers
between panel and
brackets
Use Square washer(K)
when using 8 mm
screws (F,G) and Ø10
mm washer(K) when
using 10 mm screws
(H,I)
fig 2.2
BB
CC
K
• Tighten screws so monitor brackets are firmly attached. Do not tighten with excesive
•
force. Overtightening can cause stress damage to screws, greatly reducing their
• • •
d
holding power and possibly causing screw heads to become detached. Tighten to 40
•
in•lb (4.5 N.M.) maximum torque.
• If screws don't get three complete turns in the screen inserts or if screws bottom out
•
and bracket is still not tightly secured, damage may occur to screen or product may
•
•
fail. Verify the correct fasteners are being used and if any doubt remains, contact a
professional installer.
