Customer Service 1-888-707-1880
Maurice Pincoffs Canada Inc.
©2011
Email: [email protected]
12
STEP 4: PLASTIC PARTS ASSEMBLY
1. Install the Connecting Arm Covers (2 each 57, 58) over the connection of the rod end and
Handle Bars with four M5×15m/m Phillips Head Screws(105) and two 3.5×12m/m Sheet Metal
Screw (87) by using the Short Phillips Screw Driver.
2. Install the two Wheel Covers (52) using the four M5×15m/m Phillips Head Screws (105).
3. Locate the two Rear Stabilizer Covers (19,20) and two Middle Stabilizer Covers (19,20) for the
Rear Rail Assembly and install with four M5×15m/m Phillips Head Screws (105). Then install
front stabilizer cover (49) with two M5×15m/m Phillips Head Screws (105).
4. Install the Front Handle Bar Covers (54-1 left, 55-1 right) and Rear Handle Bar Cover (54 left,
55 right) over the Handle Bar axle connections with the six 3.5×10m/m Self Tapping
Screws(87).
Note: If the elliptical is wobbly, adjust the rubber feet on the rear rail assembly to level the elliptical.
PLEASE ENSURE THAT ALL NUTS AND BOLTS ARE FIRMLY TIGHTENED BEFORE USING THE
ELLIPTICAL.
