Customer Service 1-888-707-1880
7 Maurice Pincoffs Canada Inc.
©
2010
STEP 4
1.
Attach the seat cushion (44) to the seat support frame (5). Secure using four cross head bolts (47).
2.
Attach the back cushion (45) to the seat support frame (5). Secure using two allen head bolts (59).
69
47
47
44
45
59
5
68
STEP 5
1.
Slide the monitor bracket (84) towards the front of the front post (3). The bracket should be in front of
the handlebar bracket of the front post.
2.
Slide the wires from the back of the computer (28) into the hole of the cap (87) found at the top of the
front post (3).
3.
Attach the computer (28) to the computer bracket (84) of the front post (3). Secure using four bolts (60).
4.
Connect the extension motor wire (69) to the motor wire from the back of the computer (28).
5.
Connect the front extension handpulse wire (68) to the pulse wire from the back of the computer (28).
6.
Attach the front post (3) into the main frame (1). Secure using three cross head bolts (47), three spring
washers (46) and three curve washers (61).
NOTE:
Do not tighten cross head bolts (47) until all of the bolts have been fastened. Ensure that you do
not pinch the wires when tightening the bolts.
7.
Attach the front handlebar (85) to the curve bracket of front post (3). Secure using two carriage bolts
(82), two curve washers (41), two spring washers (42) and two cap nuts (43).
42
41
41
3
60
47
46
61
69
47
46
61
61
46
47
28
1
68
PDF created with pdfFactory trial version
www.softwarelabs.com
