EverFocus WDII EQ600, Инструкция по эксплуатации

Страница: 17 / 22

15
MENU
7.3LINELOCK
I.AUTO: Set as AUTO LINELOCK mode,it will auto sense the line signal to decision
whether runnig LINELOCK function or not. And press SET user can into the
adjustment manual of V PHASE use button or to select the V PHASE
from 0~624. The larger the V Phase parameter, the more delay time the
LINELOCK.
Note: LINELOCK is only effective while the camera is connected to AC power.
II.OFF: Set the LINELOCK function off.
7.4 VIEWING
I.BRIGHTNESS: Use button or to adjust the BRIGHTNESS Level from 80 ~150 IRE.
The larger the BRIGHTNESS Level, the brighter the Camera displays.
II.CHROMA: Adjust the CHROMA saturation level of the video output. The parameter
range is from -20~20. The larger the CHROMA parameter, the stronger the
color
III.GAMMA: There are three modes can be chosen to adjust the GAMMA correction
coefficient.
Set “AUTO” for automatically setting the GAMMA correction
coefficient.
Select “MANUAL” to adjust the GAMMA correction from 0.25 ~1.0.
Select “OFF” to turn this function off.
ADVANCED SETUP
AUTO IRIS…
WHITE BALANCE…
> LINELOCK…
VIEWING…
PREVIOUS PAGE
LINELOCK SETTING
>LINELOCK <AUTO…>
<OFF>
PREVIOUS PAGE…
ADVANCED SETUP
AUTO IRIS…
WHITE BALANCE…
LINELOCK…
> VIEWING…
PREVIOUS PAGE
VIEWING SETUP
BRIGHTNESS 70 100 140IRE
CHROMA ++++++++++
-20 5 20
> GAMMA MODE <MANUAL…>
SHARPNESS…
MIRROR OFF
COLORBAR OFF
PREVIOURS PAGE…
V PHASE
>V PHASE ++++++++
0 519 624
PREVIOUS PAGE…
MANUAL GAMMA SETUP
> GAMMA +++++++++++++
0.25 0.45 1.0
PREVIOUS PAGE…