EverFocus EZ632e, Инструкция по эксплуатации

Страница: 18 / 20

18
3.1.12 MOTION: ON / OFF selectable.
MOTION DET:
ON
DETECT SENSE 000~127
BLOCK DISP ON / OFF / ENABLE
MONITOR AREA ON / OFF
AREA SEL 1~4
TOP 000~244 (NTSC) / 000~288(PAL)
BOTTOM 000~244 (NTSC) / 000~288(PAL)
LEFT
540TVL
：
000~378 (NTSC)
、
000~370 (PAL)
650TVL
：
000~474 (NTSC)
、
000~468 (PAL)
RIGHT
540TVL
：
000~378 (NTSC)
、
000~370 (PAL)
650TVL
：
000~474 (NTSC)
、
000~468 (PAL)
DETECT SENSE: Set the motion detection sensitivity.
BLOCK DISP:
Control the ON/ OFF status of the motion detection block
display.
MONITOR AREA: Set whether to use the monitoring frames.
AREA SEL:
Select the monitoring frame to be set.
TOP: Set the top side of the monitoring frame selected
BOTTOM: Set the bottom side of the monitoring frame selected
LEFT: Set the left side of the monitoring frame selected
RIGHT: Set the right side of the monitoring frame selected
3.1.13 CAMERA ID: ON / OFF selectable.
A B C D E F G H I J K L M N O P Q R S T U V
W X Y Z 0 1 2 3 4 5 6 7 8 9 - ! ” # $ % & ’
( ) _ ,
￥ ： ；
< = > ? @ \ ^ * . x + /
Each User Font
← → ↑ ↓
The camera ID cursor moves in the direction
of the arrow when the Enter operation input is
performed from the status in which ←, →, ↑
or ↓ has been selected using the character
selection cursor.
CLR
The character selected by the camera ID
cursor is cleared when the Enter operation
input is performed from the status in which
CLR has been selected using the character
selection cursor.