EVS410
1. Front and Rear Panels
Front Panel Indications
○
7
○
1
○
6
○
2
○
5
○
3
○
4
○
1
Reset: Loading factory default configuration by pressing the button, which
inside this hole. Please insert the keen-edged device to the hole for 5 seconds.
○
2
Power: Power LED when power is ON.
○
3
Alarm Out: Connect alarm devices to alarm output port of EVS410.
○
4
RS485: Connect a PTZ to RS-485 port of EVS410.
○
5
Alarm In: Connect alarm input devices to Alarm-in connector.
○
6
Ethernet: Ethernet RJ-45 port: Connect to LAN via this standard RJ-45
connector.
Yellow indicator light: On means 100Mbps, Off means 10Mbps.
Green indicator light: On means link, flicking means active, Off means link
fail.
○
7
SD Card: Slot to insert SD card.
4
