13
2.2 Alarm in and Alarm reset
There are 8 alarm sensors in for 8 channels and 1 alarm reset in, all these
9 alarm input can be set to Normally Open or Normally Closed by user and
the setting menu.
SENSOR 1
SENSOR 2
SENSOR 3
SENSOR 4
8
2 1
15
9
EverPlex 8CQ
SENSOR 5
SENSOR 6
SENSOR 7
SENSOR 8
ALARM RESET
ALARM
CIRCUIT
2.2.1 ALARM IN
There are eight alarm inputs, one for each camera of page A & B. Please connect the alarm
input in the same sequence as the cameras input BNC of page A & B.
When any alarm signal is input, machine will do the following:
1. switch to the full screen display of this channel.
2. blink the channel ID with alarm message.
3. turn on the buzzer if the buzzer setting is on.
When more alarms come up in the alarming status, the monitor screen will switch to quad
display to show all the channels which have alarms in.
EverFocus Electronics Corp.
