1.
Remove the cover cap from the top of the lens mount.
2.
To attach a C-mount/CS-mount lens, turn the focal length adjustment
ring to the appropriate position.
Note: If a C-mount lens is used, please make sure the focal length
adjustment ring is set at C position before fixing the lens.
3.
Screw the lens firmly onto the lens mount. Insert the lens plug in the
lens connector if the auto iris lens is used.
4.
Tighten the locking screw.
5.
Connect the video output of the camera to a color monitor or other
video device through a 75 ohm type coaxial cable with BNC female
connector.
6.
Plug the power cord to the outlet.
7.
Once the image appears on the monitor, adjust the focus and
diaphragm of the lens to obtain the best picture.
8.
If the subject is not in focus when adjusting focus of lens, do focal
length adjustment as following:
i.
Loosen the locking screw of the focal length adjustment ring.
ii.
Take picture of subject at a distance more than 20m away from the
camera.
iii.
Rotate the focal length adjustment ring to bring the subject in focus.
iv.
Tighten the locking screw while the adjustment is completed.
Installation Instructions
8
Содержание EQ150
Страница 4: ......
