2.
BNC Connectors
2.1 MONITOR
C
onnect this output port to the main monitor
.
2.2 QUAD OUT
Connect this output port to the VIDEO IN of VCR. The quad video
output of current active page is obtained from this connector.
3. LEVEL
Adjust the brightness level for each camera individually.
4. ALARM TIME
Adjust the alarm holding time from 1 to 20 seconds.
5. SWITCH TIME
Adjust the auto sequential switching time from 1 to 4 seconds.
1. Video In
Connect camera video output to the corresponding video in connector
by a 75 ohm coaxial cable.
EverFocus Electronics Corp.
6
Chapter II Back Panel Function
