37
4.4.5
Alarm-GPS Event Action
Press
to enter GPS Event Action Menu.
Figure 4-22 Alarm – GPS Event Action
Alarm Output:
This will transmit a signal through the alarm output
relay. It can be set to either “
NONE
” (not
active), “
1
” (active) or “
2
”
(active).
Output Type:
Output action when alarm is triggered.
Timeout: Alarm output lasts for the set time duration.
Permanent: Alarm will be continuously active until user presses “
Enter
” key.
Transparent: Alarm output remains active until event ends.
Trans+Timeout: Alarm output continues until event ends, then lasts for the set time duration.
Timeout Duration:
The amount of time the buzzer sounds when GPS event occurs. Duration selectable from 1 to
150
seconds.
Pre-alarm Record:
Check box to start copying recorded video to the hard disk from 5 seconds before the video
loss. (Pre-alarm recording rate will follow the “
Normal
” frame rate setting)
Email Notify:
Check box to enable email notification when GPS event occurs. Email operation requires that valid
email settings have been entered in the Network Setting/Email setup screen.
Network Alarm:
Check box to send out a network alarm to client PC. (requires PowerCon software and setting up
Alarm Server in Network Setup menu)
Click
button to return to the previous level of menu.
