EverFocus EMS200S, Руководство пользователя, Страница: 24 / 98

17
1.13.2 Network Connection through Patch Cable
The connection to an existing network requires a normal patch cable (straight-through). The illustration shows the
connection to a network switch or router.
Connection via a network:
Pinout of straight-through patch cable (for a network connection):
1.14 STARTUP PROCEDURE
Once you have completed the basic wiring connections, you are ready to turn on the DVR. Simply plug in the
power source. The POWER LED will light up if power is normal. Once the system has finished loading, you can
begin to configure the DVR with the on-screen display menu (right-click with the mouse to open the on-screen
display menu, or push the appropriate button on the IR remote control).
NOTE: When the DVR is placed in an environment where the temperature is under -10°C, the DVR will NOT turn
on immediately. The DVR’s heater will heat up the DVR until the temperature reaches -5°C . The DVR will only
turn on when the temperature is above -5°C.