EMC920F/EMD920F eZ.HD Mobile IR Mini Camera
3
2. Cable Description
Power Cable
Video Output Cable
1
2
No. Name
Descriptions
1
Power Cable
Connects to a 12VDC power source.
2
Video Output
1080p output, using a 75 Ohm BNC-type coaxial cable.
3. Installation
3.1 EMD920F
1.
Attach the supplied
Base Gasket
to the mounting surface to mark the four screw holes on the
mounting surface. You can optionally mark a cable hole only if you want to run the cables
through the surface. Drill the marked screw holes and cable hole on the mounting surface.
Base Gasket
Cable Hole
Screw Hole
2.
Loosen the four camera cover screws using the supplied
Hexagon Wrench
and then remove the
camera cover.
3.
Place the supplied
Base Gasket
between the
Mounting Surface
and
Camera Base
and then
screw the camera base to the surface using the supplied four
Screws
. Note that you can either
run the cables through the Cable Hole or through the Side Cut.
