eIVP-CFS-AI-D0000 AI Box
17
Note:
Connect the power switch, reset switch and system status indicator on the chassis to this
header according to the pin assignments below. Note the positive and negative pins before
connecting the cables.
PWRBTN (Power Switch):
Connect to the power switch on the chassis front panel. You may configure the way to turn off
your system using the power switch.
PLED (System Power LED)
Connect to the power status indicator on the chassis front panel. The LED is on when the system is
operating. The LED keeps blinking when the sys-tem is in S1 sleep state. The LED is off when the
system is in S4 sleep state or powered off (S5).
HDLED (Hard Drive Activity LED):
Connect to the hard drive activity LED on the chassis front panel. The LED is on when the hard
drive is reading or writing data.
Back Side
Power Button Header
(PWR_BTN1)
Fan Connector
(FAN1)
Battery Connector
(BAT1)
ESPI Connector
(ESPI1)
