EverFocus eIVP-CFS-IV-V0004, Руководство пользователя

Страница: 15 / 79

eIVP-CFS-IV-V0004
8
1.5.1 PoE Ports
There are 4 RJ45 connectors in the rear side. It supports IEEE 802.3 at (PoE+) Power over Ethernet
(PoE) connection delivering up to 37W/54V per port and 1000 BASE-T gigabit data signals over
standard Ethernet Cat 5/Cat 6 cable.
Each PoE connection is powered by Intel® I210 Gigabit Ethernet controller and independent PCI
express interface to connect with multi-core processor for network and data transmit optimization.
Only when PoE port starts to supply power to power devices, the dedicated LED will be lightened.
PS. Suggest to use PoE function when power input is over 12V.
The pin-outs of LAN 3 and LAN 6 are listed as follows:
Pin No. 10/100Mbps 1000Mbps PoE
1
E_TX+ MDI0_P PoE+
2
E_TX- MDI0_N PoE+
3
E_RX+ MDI1_P PoE-
4
----- MDI2_P
-----
5
----- MDI2_N
-----
6
E_RX- MDI1_N PoE-
7
----- MDI3_P
-----
8
------ MDI3_N
-----
Each LAN port is supported by standard RJ-45 connector with LED indicators to present
Active/Link/Speed status of the connection.
The LED indicator on the right bottom corner lightens in solid green when the cable is properly
connected to a 100 Mbps Ethernet network; The LED indicator on the right bottom corner lightens in
solid orange when the cable is properly connected to a 1000 Mbps Ethernet network; The left LED
will keep twinkling/off when Ethernet data packets are being transmitted/received.
LED
Location
LED Color 10Mbps 100Mbps 1000Mbps
Right
Green/
Orange
Off Solid Green Solid
Orange
Left
Yellow
Twinkling
Yellow
Twinkling
Yellow
Twinkling
Yellow
POE LED LED Color POE Status
LED 3-6 Solid Green POE ON
1.5.2 Serial Port
Serial port 1 to 4 (COM 1 to 4) can be configured for RS-232, RS-422, or RS-485 with auto flow control
communication. The default definition of COM 1 and COM 2 is RS-232. If you want to change to RS-
422 or RS-485, you can find the setting in BIOS.
BIOS Setting Function
COM 1
RS-232
RS-422 (5-wire)
1 8