3-25
E
Product specifications
Contents
-
Zoom lens single body COMBI DOME CAMERA
- AC 24
±
10% (50Hz
±
0.3Hz)
- 18W
- PAL STANDARD COLOR SYSTEM
- 1/4 inch IT CCD
- 752(H) x 582(V)
- 625 Lines, 2:1 Interlace
- Horizontal : 15, 625 Hz(INT) / 15, 625 Hz(L/L)
Vertical : 50 Hz(INT) / 50 Hz(L/L)
- INT/LINE LOCK
- 480 TV LINES
- -50dB or less (AGC OFF)
- 1 lux (AGC Max, Sensitive x2 up)
- ATW/AWC/MANUAL MODE
(3200°K, 5600°K, R/B GAIN Court)
-
COMPOSITE VIDEO OUT : 1.0 Vp-p 75 ohms/BNC
- one body; 22X Zoom lens
- Focal length : 3.6 to 79.2 mm
- Aperture : F1.6(Wide), F3.8(Tele)
- Auto Focus
- PAN range : 360° Endless
- Preset Pan Speed : 240° /sec, maximum
- Manual Pan Speed : 0.8° ~ 90° /sec (64Step)
- TILT range : 0° ~ 90°
- Preset Tilt Speed : 150° /sec, maximum
- Manual Tilt Speed : 0.8° ~ 45° /sec (64Step)
- Tele/Wide(ZOOM), Near/Far(FOCUS),
Iris Open/Close, Pan/Tilt
- Alarm Inputs : 4 IN(5mA Sink)
- Alarm Outputs : 3 OUT (Open collector : 2
DC24V 40mA Max, Relay : 1, NO, NC, COM
2A 30VDC, 0.5A 125VAC Max)
- 14°F ~ 122°F
- ~90%
- DOME : 147 (ø),
Outline : 159.5( ø) x 176(H)(Adapter:23.5(H)mm)
- 2Kg
NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
Items
Product Type
Power Input
Power Consumption
Broadcasting Type
Image Device
Effective Pixels
Scanning Mode
Scanning line Frequency
Synchronization Mode
Resolution
S/N Ratio
Min. Object Illumination
Color Temperature
Signal Output
Lens
PAN Function
TILT Function
REMOTE CONTROL
ALARM
Operation Temperature
Operation Humidity
SIZE
Weight
ED2250S/P
3-24
To set the area, select "SET AREA" and then press the [Enter] key.
With OSD showing "SET", use the [up, down, left, right] key to set the
AREA size.
➜
[Down] KEY
➜
[Enter] KEY
Entering the
AREA Setup
Mode
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA
...
SET LEVEL 1
EXIT
QUIT
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA
...
SET LEVEL 1
EXIT
QUIT
Select "SET LEVEL" and set the Level of Mask Area.
This Level can be set anywhere from 1 (black) to 8 (white), and the set
level will be applied to all eight areas.
"SAVE" and exit after setting the Level to complete the settings for the
Privacy Zone.
●
Make the area large enough so that the relevant area can be hidden
undermeath it.
CAM RESET
CAM RESET clears all the settings made so far and restores the factory
default settings.
"CAMERA RESET?" message appears when you select CAM RESET.
Select "CANCEL" to return to the menu setup display or select OK to
restore the factory default settings.
●
Be careful when performing a CAM RESET operation, as it deletes all
setup values.
➜
[Enter] KEY
The AREA
Setup is
complete.
➜
[Down] KEY
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA
...
SET LEVEL 1
EXIT
QUIT
PRIVACY ZONE SET 1
SET PAN/TILT ...
SET AREA
SET
SET LEVEL 1
EXIT
QUIT
