EverFocus ECOR264-4D1, Руководство пользователя

Страница: 13 / 22

22
14. Start time for bar (the left-most point of the time bar)
15. Current playback time (the time indicated by the slider)
16. End time for time bar (the right-most point of the time bar)
3.6 PTZ
3.6.1 General PTZ control
(if PTZ cameras are installed)
Right-click to bring up the menu bar and click on to display PTZ Controls .
The following actions can be performed using the PTZ Menu:
1. Use Direction Arrows (up, down, left, right) to move the camera to the desired direction
and angle.
2. To Zoom , Click “ Z+” to zoom closer or “ Z-” to zoom farther away.
3. To Focus , click “ F+ ” to focus far or click “ F- ” to focus near.
4. With Iris , you can increase the amount of light by clicking “ I+ ” or decrease it by clicking “ I- “.
5. To program a preset position (if supported by the camera)
a. Move PTZ camera to the specified position
b. Click “ Preset ” button
c. Click the number of the desired position (This will be displayed in the box)
d. Click “ Set ” button
6. To jump to a preset position
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Go ” button
7. Shortcut for presets #1-9
a. Click digit 1-9 button without clicking any other buttons
b. The camera will seek that preset position
8. Steps to delete a preset position (if supported by the camera)
a. Click “ Preset ” button
b. Click the number of the desired position
c. Click “ Delete ” button
9. For Auto Pan
a. Click “ Auto Pan ” button
10. Pattern Operation (Pattern is the “0” Tour in Everfocus and Pelco PTZ cameras)
a. Click “ Pattern ” button
11. Steps to run a tour
a. Click “ Tour ” button
b. Click the number of the desired tour