EverFocus EBC890, Руководство пользователя

Страница: 45 / 64

37
37 37
37
Change Card Number for a User
Under the following menu, press to change users’ card number:
Present the new card or manually enter new card number at the below screen:
Press at this window to exit without changing. If the new card is accepted successfully, the
setup is complete and the below window will be shown.
If the new card is being used by another user, the below window will be shown.
Set User PIN Setting
Each card in the EverAccess access control system is associated with a 6digit PIN. The PIN
status can be set as enabled or disabled and if enabled, user is required to enter the PIN every
time he enters/exit the door if the reader is a keypad reader and PIN is required by the door
access mode. Press under the below window to enter the set PIN setting.
Enter new PIN as following instruction and repeat it in the next window, shown as below
samples. Note the PIN must be 6 digits. Press
to confirm
，
press to exit without
saving.
User already existed User already existed User already existed User already existed
Setting updated Setting updated Setting updated Setting updated
successful
successful successful successfully ly ly ly
Repeat New PIN: Repeat New PIN: Repeat New PIN: Repeat New PIN:
______ ______ ______ ______
Input New PIN: Input New PIN: Input New PIN: Input New PIN:
______ ______ ______ ______
Set PIN Set PIN Set PIN Set PIN
Input New Card #: Input New Card #: Input New Card #: Input New Card #:
________
________ ________
________
Set Card Number Set Card Number Set Card Number Set Card Number
Data modified
Data modified Data modified
Data modified
successfully
successfully successfully successfully