manualshive.com logo in svg

EverFocus DVR-1600, Инструкция по эксплуатации, Страница: 20 / 56

Поделиться
Скачать
EverFocus DVR-1600 Скачать руководство пользователя страница 20

6.5 COVERT SETTING MENU

COVERT SETTING MENU

CH   OP

1      OFF
2      OFF
3      OFF
4      OFF
5      OFF
6      OFF
7      OFF
8      OFF
9      OFF

(10     OFF)
(11     OFF)
(12     OFF)
(13     OFF)
(14     OFF)
(15     OFF)
(16     OFF)

In COVERT  SETTING MENU , we define:

The covert setting menu allows you hide the desired camera on the 
display in a blue background. Change setting to ON for covering camera.
Camera is not visable in Live and Playback mode, unless this function is 
deactivated in COVERT menu.

Default setting is OFF for all cameras.

Note: With network access a covert camera is only visable for users 
with “ADMIN” password level.  For  users with “GENERAL” and 
“GUEST” level the covered camera is not visable.

Turn the 

JOG

dial clockwise or counter-clockwise to select the options.

Press 

MENU

key to return to Main Menu, press again to leave Set up Menu.

MENU

Press 

ENTER

key to confirm the option and move to next column.

ENTER

MENU

15

Columns in brackets () only valid for DVR--1600

Содержание DVR-1600

























































Отзывы:

Нет отзывов